Pour une aide personnalisée ou une livraison plus rapide
+32 2 558 30 00
The IDE to SATA Converter (TU-IDES) allows you to connect IDE devices such as CD, DVD and hard disk drives to a Serial ATA port on your computer’s motherboard.
Without software installation required, simply connect power and data cables to IDE devices to SATA connector on your computer.
- Connect any IDE CD, DVD or hard drive device to an available Serial ATA port
- Use your current IDE device on new SATA motherboards
- Utilizes Serial ATA 1.0 and hot-pluggable technology
- Master/slave hard drive emulation supported
- Supports PIO mode 0~4 and Ultra DMA mode 0~7
- Supports ATAPI Packet command set, and 48-bit LBA addressing
- Supports additional ATA commands for serial ATA SCR access
- Power save mode built-in
- Serial ATA Built In Self Test (BIST) ready
Hardware
- Standard : ATA 33/66/100/133, SATA 1.0
- Supported OS : Any OS that supports ATA and SATA
-
Input
- 7-pin female SATA data connector
- 4-pin power connector
- Output : 40-pin IDE female connector to IDE device
-
Cables
- 1x SATA cable
- 1 x Y power cable
- Power Consumption : 78 mA
- Dimension : 57 x 35 x 12mm (2.3 x 1.4 x 0.4 in.)
-
Weight
- Main: 15g (0.6oz.)
- With wires: 40g (1.4oz.)
- Temperature : -20ºC to 60ºC (-4ºF to 140ºF)
- Humidity : 0~90%, Non-Condensing
- Certification : FCC, CE