0 Produit(s) dans le panier


Redcorp# 33342249 Article# ADSA3GPX1-2E
Redcorp# 33342249 Article# ADSA3GPX1-2E
€ 39,46 Hors TVA
Plus de stock. Prière de nous contacter !
Livraison GRATUITE sur une commande de plus de 100€ Excl.TVA.
Contact Redcorp on +32 (0)2 558.30.00
Appelez le +32 (0)2 558.30.00 ou demarrez un chat pour une livraison plus rapide

This new family of PCI Express controllers offer the latest 3G/sec SATA performance and configuration flexibility at an amazingly affordable price. The controllers comes with a choice of 2 internal SATA II ports or 2 eSATA II ports for external SATA connection. Both controllers can also be installed into low profile PCs using the bundled low profile bracket. The two ports can be configured as individual ports, as RAID 1, 0, 0+1, RAID 5 or JBOD. Both controllers are also Port Multiplier compatible, thus offering potential expansion capabilities and new storage solutions

  • Choice of controller with 2 internal SATA II ports or 2 eSATA ports
  • Install into both standard height or low profile system.
  • Install in PCI-Express BUS
  • Fully compliant with SATA II and SATA 1.0 standard
  • Maximum 3Gbits/sec per port
  • Support NCQ commands
  • Compatibility with Port Multiplier
  • Silicon Image chip set SiI 3132
  • Use as a non-RAID or RAID controller Built-in RAID 0, RAID 1, RAID 1+0, RAID5 and JBOD support (illustration on the left is the bundled RAID utility for Windows OS. RAID5 and JBOD requires Port Multiplier)
  • Upgradeable firmware
  • Hot swap support - drive can be removed and added without system shut down or restart
  • eSATA connector for more secure connection, reliability and supports up to 2 meters cable length
  • Compatible with drivers for Windows XP, Vista, windows 7, Windows 8, Windows 2000, 2003 and 2008 Server, Linux (2.4 kernel and higher)
  • Linux Distributions compatible
  • 48 bits LBA, support HDD partition larger than 137GB
  • Supports 1-lane 2.5Gbps PCI Express
  • Hot-plug capability
  • SATA II transfer rate of 3.0Gbps
  • Fully compliant with Serial ATA 1.0 specifications
  • Supports two independent Serial ATA channels
  • Independent Link, Transport, and data FIFO
  • Independent command fetch, scatter/gather, and command execution
  • Supports Legacy Command Queuing (LCQ)
  • Supports Native Command Queuing (NCQ)
  • Supports Non-zero offsets NCQ
  • Supports Out of order data delivery NCQ
  • Supports FIS-based switching with Port Multipliers
  • 31 Commands and Scatter/Gather Tables per Port
  • Two Pin headers on board for LED connection
  • Temperature: Operating 0 to 70 degree C.
  • Storage: -25 to 90 degree C.
  • Humidity: Operating 20% to 80%
  • Non Operating 15% to 90%
  • RAID 0, 1, 0 + 1, RAID 5 and JBOD firmware on board
  • To install OS onto a single hard drive (not in a RAID set), it must be connected to the 1st port (the lowest port on the PCI bracket). The controller BIOS must be set to 'CONCATENATED'
  • Completely with drivers for Windows 2000 , XP, Vista, 7, Windows 2000, 2003 and 2008 Server, Linux (2.4 kernel and higher)


Produits Similaires